At any point do you feel that you’re getting out-hurt by your Update Eufy Spaceview Firmware? To make life simpler, we need to impart month to month tips to you that will assist you with capitalizing on your eufy gadgets. Watch out for more “Open the force of eufy” posts and gain the information should have been top of the shrewd home class.
For this portion, we will investigate our Updating Eufy Spaceview Firmware. Specifically, how to update the firmware to the most recent form so you can appreciate calmer and more insightful mode exchanging. The most recent update permits the camera to identify levels of apparent light for smoother changes while exchanging between modes. You’ll at absolutely no point in the future be upset by that snap sound!
Follow the means beneath to finish the update
Download the most recent firmware form:
Stage 1 – Snap the connection to download the most recent firmware here:
- https://www.eufylife.com/support/5505/spaceview-child monitor 2.4k
Stage 2 – Snap the Firmware v2.4.4 and follow the moves toward download.
Redesign the monitor :desktop_computer:
Stage 1 – Interface the monitor to your PC by means of an Update FX6 Firmware. When associated you will see a record named “SN93701PU” showed on the screen.Note that:
The gave link can’t be utilized to associate the two gadgets. On the off chance that you don’t possess the fundamental link, you can contact our customer administration group who will encourage you on how to acquire the important link. Reach us at – [email protected].
Guarantee the screen is on all through the sum of the update interaction. Assuming the monitor is off it implies that the association between the monitor and PC has been broken.
Stage 2 – Open the “SN93701PU” document. Duplicate the Update Eufy Spaceview Firmware .bin document and move it to the “SN93701PU” organizer. There will be a document move brief on the monitor (as presented underneath), and the exchange will require roughly 5-6 minutes.
Stage 3 – After the record move is finished, the monitor will restart automatically. The association between the monitor and the PC will end. After the monitor restarts, the monitor.bin record will at this point not be apparent.
Stage 4 – At long last, make sure that the monitor’s update was effective. You can see the firmware variant being used by going to – menu — >”… ” — > associate with us — > Equipment
Update the camera :video_camera:
Stage 1 – Interface the camera to your PC by means of an information link. When associated you will see a record named “SN93700BU” showed on the screen.
Stage 2 – Open the “SN93700BU” record. Duplicate the Camera.bin record and move it to the “SN93700BU” organizer. The exchange will require around 20-30 seconds.
Stage 3 – After the document move is finished, the camera will restart automatically. The association between the camera and the PC will end. After the camera restarts, the Camera.bin document will as of now not be apparent.
Stage 4 – At last, make sure that the camera’s update was fruitful. You can see the firmware rendition being used by going to – menu — >”… ” — > interface with us — > Programming
Power Unlocked!:unlock:
Update Total. You can now partake in the most recent rendition of our Update Eufy Spaceview Firmware. Once more, never be bothered by the sound of mode switches.
Assuming that you are as yet unfit to update your child monitor to the most recent firmware variant you can follow the “eufy Security Child Monitor Programming Redesign Guide” on YouTube.
The accompanying circumstances show that the update fizzled. In the event that you experience any of the accompanying, if it’s not too much trouble, begin once more.
The Monitor menu is incomplete or mixed up.
The monitor show is off. When associated with your PC, if the “ROM” document shows up rather than the “SN93701PU” record, follow the monitor update steps and restart the gadget.
The camera can’t be matched with the monitor. When associated with your PC, if the “ROM” document shows up rather than the “SN93700BU” record, follow the camera update steps and restart the gadget.
Where you can track down us:
In the event that you experience any issues during use or have some other Update Eufy Spaceview Firmware, if it’s not too much trouble, contact our customer administration group through the accompanying channels:
- eufy Security app－>Help－>Live talk/Call us/Input
- Ask your inquiries here at the bottom of this post
- Send us an email: [email protected]
We will hit you up straightaway.